ENERGY PROFESSIONAL
BRAKE PAD SERIES
Hardex®
AVAILABLE IN 2 FORMULAS
OE STYLE BACKING PLATE
OE STYLE
3 LAYER SHIMS
PREMIUM FRICTION MATERIAL
& OE SCORCHED
HTC TECHNOLOGY
ANTI-RATTLE
3 LAYER
OE MATCHING
SHIMS
WE USE THE MOST ADVANCED ANTI-RATTLE SHIMS TECHNOLOGY TO ENSURE A QUIET BREAKING PERFORMANCE FOR DRIVERS.
PREMIUM FRICTION MATERIAL
& OE SCORCHED
MANUFACTURED USING THE FINEST RAW MATERIALS AND SCORCHED SAME AS THE OEM PRODUCTS.
In order for a newly installed brake pad to have superior braking performance and comfort from the start, Hardex® uses a scorching process that delivers a shorter bedding-in period and an efficient brake operation, right from the first brake use.
OE STYLE
BACKING PLATE
AVAILABLE IN
WIRE-DRAWING AND
HOLE DRILLED TYPES.
HCT
TECHNOLOGY
AN INNOVATIVE COATING TECHNOLOGY TO REDUCE STOPPING DISTANCE BY HARDEX® BRAKES CANADA.
Positive Molding Technology is an important factor in production of HARDEX® products. Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is proven to have much better stopping performance. High resin increases fading, which can increase stopping distances up to 50%.
All HARDEX® brake pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.
POSITIVE MOLDING TECHNOLOGY MAIN FEATURES:
-
Maintains constant friction consistency
-
Ensures better braking performance
-
Delivers longer service life
-
Requires less resin material
-
Resists heat fade
In addition to these features HARDEX® has added a scorching process to all of its brake pads. This additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the brake-in process. This OEM process enhances key friction performance levels. Scorching raises initial cold effectiveness, stabilizes friction levels right out of the box, provides consistent performance across the entire operating range. During the scorching phase; each brake pad surface is super-heated to simulate the initial break-in process performed by installation technicians. This additional step removes any uncured bonding agents eliminating the need for initial break-in and reducing noise caused by pad glazing. Scorching thermally conditions the pad material which yields a more consistent and higher friction level right out of the box. Scorching benefits the vehicle owner by promoting a more complete bed-in of new pads, increasing the effective stopping power from the first stop.
SCORCHING PROCESS MAIN FEATURES:
-
Removes impurities such as bonding material
-
Provides optimal stopping performance
-
Delivers consistent performance across the entire operating range
-
Reduces noise caused by pad glazing
Describe your image.
ENERGY® GOLD
BRAKE PADS SERIES
The professional ENERGY® GOLD BRAKE PADS series are designed for everyday driving and compatible for all type of passenger cars! A world-class combination of best stopping power and quiet braking performance benefiting from the unique HCT technology by HARDEX BRAKES CANADA.
GOLD SERIES OFFER:
-
HCT technology: an innovative coating technology to reduce stopping distance
-
Outstanding braking performance for heavy load vehicles
-
40,000 to 50,000 km lifetime
-
100% asbestos free formula
-
30,000 km or 12 months replacement warranty (see hardex.ca for terms & conditions)
-
OE style backing plate available in wire-drawing and hole drilled options, hot-glued to
guarantee shear resistance in most extreme driving conditions
PLATINUM SERIES OFFER:
-
HCT technology: an innovative coating technology to reduce stopping distance
-
Outstanding braking performance for heavy load vehicles
-
50,000 to 60,000 km lifetime
-
Exceptionally long lasting pad life
-
100% asbestos free formula
-
Maximum noise reduction
-
Smooth pedal feel
-
OE style backing plate available in wire-drawing and hole drilled with powder coated for corrosion protection and hot-glued to guarantee shear resistance in most extreme driving conditions
Describe your image.
ENERGY® PLATINUM
BRAKE PADS SERIES
The professional ENERGY® PLATINUM BRAKE PADS series are our top of the line brakes which weve ever designed! A unique formulation to offer the ultimate braking performance to drivers! We use the finest raw materials to manufacturer this new series of brake pads. The platinum series are truly a world-class unique product available in the market at this moment. Platinum series are recommended for the latest generation of cars from 2012 and younger or heavier suvs.
